Display Scaling

How to Check Display Scaling on All Monitors

Ensure that both your main and virtual screens are set to 100% scaling to avoid visual distortion or cursor misalignment.

1. Open Display Settings

  • Press Windows + I
  • Navigate to System → Display

2. Select Each Monitor

  • Click on the numbered monitor (e.g., 1 or 2) at the top of the window
  • Repeat for all connected displays

3. Check Scale & Layout

  • Scroll down to Scale & layout
  • Confirm Scale is set to 100% (Recommended) for every monitor

4. Match Resolution

  • Verify Display resolution matches each monitor’s native resolution
    • Examples: 1920×1080, 2560×1440, 3840×2160

5. Apply Changes

  • Adjust any mismatched settings and click Apply
  • Log out or restart if changes don’t take effect immediately

⚠️ Note:

Both main and virtual displays must use identical scaling (100%) to prevent overlay issues, cursor offset, or distorted visuals.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us